Pressure rig for repetitive casting

The invention is a pressure rig for repetitive casting of metal. The pressure rig performs like a piston for feeding molten metal into a mold. Pressure is applied to an expandable rubber diaphragm which expands like a balloon to force the metal into the mold. A ceramic cavity which holds molten metal is lined with blanket-type insulating material, necessitating only a relining for subsequent use and eliminating the lengthy cavity preparation inherent in previous rigs. In addition, the expandable rubber diaphragm is protected by the insulating material thereby decreasing its vulnerability to heat damage. As a result of the improved design the life expectancy of the pressure rig contemplated by the present invention is more than doubled. Moreover, the improved heat protection has allowed the casting of brass and other alloys with higher melting temperatures than possible in the conventional pressure rigs

Ceramic and coating applications in the hostile environment of a high temperature hypersonic wind tunnel

A Mach 7, blowdown wind tunnel was used to investigate aerothermal structural phenomena on large to full scale high speed vehicle components. The high energy test medium, which provided a true temperature simulation of hypersonic flow at 24 to 40 km altitude, was generated by the combustion of methane with air at high pressures. Since the wind tunnel, as well as the models, must be protected from thermally induced damage, ceramics and coatings were used extensively. Coatings were used both to protect various wind tunnel components and to improve the quality of the test stream. Planned modifications for the wind tunnel included more extensive use of ceramics in order to minimize the number of active cooling systems and thus minimize the inherent operational unreliability and cost that accompanies such systems. Use of nonintrusive data acquisition techniques, such as infrared radiometry, allowed more widespread use of ceramics for models to be tested in high energy wind tunnels

DETERMINING THE EFFECTS OF LAND CHARACTERISTICS ON FARMLAND VALUES IN SOUTH-CENTRAL IDAHO

This study focused on evaluating the effects of different attributes that impact irrigated farmland values in South-central Idaho. Results indicate that study area farmland values are largely determined by agricultural productivity (profiability) related factors. However, estimated "development increment values" for parcels that seemed to be under development pressure in the study area are explainable by nonagricultural variables.Land Economics/Use,

Lafayette Walker: Not a Republican Lapdog, but a Pitmaster

Lafayette Walker (1822 – 1902), an enslaved black man in Tennessee before the Civil War, became a soldier for the Union in 1861. After the war, he was regarded as a political activist, as a community leader capable of controlling who the next mayor of San Antonio would become, blacksmith, and a “barbecue artist.” The argument here does not lie in what exactly his bbq tasted like or what a black man was doing identifying as a republican. The argument goes much deeper and shows that he did not care he was black or a slave, but instead he showed a black man could become powerful in politics and not some republican lapdog

Numerical Modeling of Lifting Flows in the Presence of a Free Surface

This thesis work started as an attempt to create a computational tool to model hydrodynamics problems involving lifting flows. The method employed to solve the problem is potential flow theory. Despite the fast evolution of computers and the latest developments in Navier-Stokes solvers, such as the Ranse methods; potential flow theory offers the possibility to create or use existing computational tools, which allow us modeling hydrodynamics problems in a simpler manner. Navier-Stokes solver can be very expensive from the computational point of view, and require a high level of expertise in order to achieve reliable models. Based on the above, we have developed a lifting flow modeling tool that we hope can serve as the starting point of a more elaborated method, and a valuable alternative, for the solution of different hydrodynamics problems. Key words highlighting important concepts related to this thesis work are: Vortex, circulation, potential flow, panel methods, Sources, doublets

Hyperelastic cloaking theory: Transformation elasticity with pre-stressed solids

Transformation elasticity, by analogy with transformation acoustics and optics, converts material domains without altering wave properties, thereby enabling cloaking and related effects. By noting the similarity between transformation elasticity and the theory of incremental motion superimposed on finite pre-strain it is shown that the constitutive parameters of transformation elasticity correspond to the density and moduli of small-on-large theory. The formal equivalence indicates that transformation elasticity can be achieved by selecting a particular finite (hyperelastic) strain energy function, which for isotropic elasticity is semilinear strain energy. The associated elastic transformation is restricted by the requirement of statically equilibrated pre-stress. This constraint can be cast as \tr {\mathbf F} = constant, where $\mathbf{F}$ is the deformation gradient, subject to symmetry constraints, and its consequences are explored both analytically and through numerical examples of cloaking of anti-plane and in-plane wave motion.Comment: 20 pages, 5 figure

Acquisition of acid vapor and aerosol concentration data for use in dry deposition studies in the South Coast Air Basin

An atmospheric monitoring network was operated throughout the South Coast Air Basin in the greater Los Angeles area during the year 1986. The primary objective of this study was to measure the spatial and temporal concentration distributions of atmospheric gas phase and particulate phase acids and bases in support of the California Air Resources Board's dry deposition research program. Gaseous pollutants measured include HNO_3, HCl, HF, HBr, formic acid, acetic acid and ammonia. The chemical composition of the airborne particulate matter complex was examined in three size ranges: fine particles (less than 2.2 μm aerodynamic diameter, AD), PM_(10) (less than 10 μm AD) and total particles (no size discrimination). Upwind of the air basin at San Nicolas Island, gas phase acids concentrations are very low: averaging 0.3 μg m^(-3) (0.1 ppb) for HNO_3, 0.8 μg m^(-3) for HCl, 0.13 μg m^(-3) for HF, and 2.6 μg m^(-3) for formic acid. Annual average HN03 concentrations ranged from 3.1 μg m^(-3) (1.2 ppb) near the Southern California coast to 6.9 μg m^(-3) (2.7 ppb) at an inland site in the San Gabriel Mountains. HCl concentrations within the South Coast Air Basin averaged from 0.8 μg m^(-3) to 1.8 μg m^(-3) during the year 1986. Long-term average HF concentrations within the air basin are very low, in the range from 0.14 to 0.22 μg m^(-3) between monitoring sites. Long-term average formic acid concentrations are lowest near the coastline (5.0 μg m^(-3) at Hawthorne), with the highest average concentrations (10.7 μg m^(-3)) observed inland at Upland. Ammonia concentrations at low elevation within the South Coast Air Basin average from 2.1 μg m^(-3) to 4.4 μg m^(-3) at all sites except Rubidoux. Rubidoux is located directly downwind of a large ammonia source created by dairy farming and other agricultural activities in the Chino area. Ammonia concentrations at Rubidoux average 30 μg m^(-3) during 1986, a factor of approximately 10 higher than elsewhere in the air basin. Annual average PM_(10) mass concentrations within the South Coast Air Basin ranged from 47.0 μg m^(-3) along the coast to 87.4 μg m^(-3) at Rubidoux, the farthest inland monitoring site. Five major aerosol components (carbonaceous material, NO_3^-, SO_4^-, NH_4^+ and soil-related material) accounted for greater than 80% of the annual average PM_(10) mass concentration at all on-land monitoring stations. A peak 24-h average PM_(10) mass concentration of 299 μg m^(-3) was observed at Rubidoux during 1986. That value is a factor of 2 higher than the federal 24-h average PM_(10) concentration standard, and a factor of 6 higher than the State of California PM_(10) standard. More than 40% of the PM_(10) aerosol mass measured at Rubidoux during that peak day event consisted of aerosol nitrates plus ammonium ion. Reaction of gaseous nitric acid to form aerosol nitrates was a major contributor to the high PM_(10) concentrations observed in the Rubidoux area near Riverside, California